What Factors Affect the Liquid Temperature of the Closed Cooling Tower?


https://www.auvc.com/cooling-tower-application/

 

How much the temperature of the liquid in the cooling tower coil has dropped is the scale to measure the efficiency of the cooling tower. The factors that affect the temperature of the liquid in the cooling tower coil have become a concern for users. Formal closed cooling tower manufacturers have obtained many important factors based on years of practice, so they provide basic data for improving cooling towers, and are the key improvement targets for cooling tower cooling efficiency.

 

 

 

According to the principle of evaporative heat dissipation, when the air volume in the closed cooling tower increases, the force of the wind on the surface of the coil will increase relatively, the heat dissipation will be accelerated, and the temperature of the fluid in the tube will decrease, otherwise the temperature of the fluid will increase, so this method is The best way to control the fluid temperature, if the fan uses a single-speed motor, so when the temperature is too high during operation, you can restart the exhaust system to solve the problem, so that the cooling tower fan on the top of the tower is in normal operation.

 

 

 

1. The temperature of the cooling fluid in the coil of the closed cooling tower is closely related to the heat load and the amount of cooling water

 

 

Increase the flow velocity of the cooling fluid in the coil, the temperature of the fluid in the tube will increase, the flow velocity of the fluid will become slower, and the temperature of the fluid will also drop, because the velocity of the fluid in the tube determines the fluid and the spray water outside the coil, The contact time of the air, the wet bulb temperature in the local air drops, and the temperature of the cooling fluid also drops, but the temperature of the drop is different. The test shows that it takes a certain amount of time for the fan to turn from the beginning to full speed. The fan used in the current closed cooling tower is affected by the motor and can be started several times per hour. If a two-speed motor is installed, the temperature of the cooling fluid can be controlled more flexibly. The fans run at half speed when the cooling fluid temperature is slightly lower, and at full speed when the cooling fluid temperature is higher.

 

 

 

2. Cooling capacity of closed cooling tower

 

 

According to the cooling capacity of the cooling tower and the amount of water sprayed, it can be known that the cooling capacity changes with the amount of water sprayed. Therefore, the cooling effect of the cooling tower will become better and better as the movement capacity of the cooling tower increases. When the closed cooling tower When the cooling capacity reaches a certain peak value, the amount of spray water will continue to increase, while the increasing trend of cooling capacity will gradually slow down, so it will remain at the highest point. Therefore, it can be seen that the more spray water, the better the cooling capacity. Within a certain range of cooling capacity, appropriately increasing the amount of spray water can improve the cooling capacity. Due to the excessive water spray volume, it will not have a great impact on the cooling capacity. In addition, when the spray water volume increases, the flow resistance on the air side will increase significantly, and the power consumption of the fan will also increase accordingly, the amount of spray water is reduced, and the cooling capacity is reduced, but when it is reduced to a certain value, the amount of sprayed water will be less affected by the cooling capacity.

 

 

 

Therefore, when designing a closed cooling tower, the manufacturer must choose the appropriate cooling capacity and circulating water volume. In the actual cooling selection, the user can budget the cooling capacity and water volume according to the actual situation. In most cases, the theoretical The value is more consistent with the actual test value, because the air wet bulb temperature value will vary every day, so a certain range of deviation will be allowed. In the same period of time, more cooling spray water can be taken away, reducing the water vapor pressure around the cooling coil, ensuring the evaporation and heat absorption of subsequent spray water, but the larger the air flow, the better. The efficiency is the highest when the maximum cooling capacity of the closed cooling tower is reached. Therefore, in the process of using the cooling tower, it needs to be adjusted according to the relevant requirements and actual conditions, so as to obtain the ideal use effect.

 

If you are looking for more details, kindly visit our website.

 

评论

发表评论

此博客中的热门博文

What you need to know about laser focus lenses?

  How it all works The focusing lens in a Co2 laser cutter/engraver converges the laser beam to form the focal point of the laser cutting or engraving material. This point is located at the sharpest point of convergence of the beam and is often referred to as the "spot size". Several factors can affect this spot size, which will ultimately determine the outcome of your project. The purpose of this article is to explain these differences and give you a better understanding of which lens is best for you.   What are the different options? The most common lens options are 1.5, 2.0, 3.0 and 4.0 inches. These measurements are the focal lengths needed for each lens to focus perfectly. For example, a 1.5-inch lens needs to be exactly 1.5 inches above the surface of the material to focus correctly. The main factors that distinguish each lens are spot size and depth of focus. The smaller the lens, the smaller the focal length and spot size.   What is the difference between them and whi
阅读全文

Why You Need A Military Grade Tent

图片
With all the available tenting options out there, there’s really nothing quite like  a military-grade tent . These tents are made to survive the harshest of situations for the longest of times. Whether you might need a tent for your own personal use or for official purposes, you cannot go wrong with a cost-effective military-grade tent.  In this article, we share some insights on how military-grade tents are made, why some tents make the military-grade cut, and how others do not, the features of these tents that allow for them to survive different conditions, and we address cost concerns. You will definitely be heading out to get yourself a military-grade tent after this read. How Are Military Grade Tents Made Military-grade tents often feature windows of a considerably larger size so as to allow air circulation with the tent as well as ventilation. Windows help in saving energy as it allows for light to shine in. Mosquitoes and insects might prove to be a concern when it comes to tent
阅读全文

These protective gear give you more peace of mind when exercising!

图片
Whether it's kicking, playing, or going out for a run, we all need to protect our legs and knees, so today, I will introduce you to several sports protective gear, so that you can exercise with more confidence! Sports protective gear, a tool to protect you from injury during sports. Generally, it can be divided into head protector, shoulder protector, hand protector, elbow protector, wrist protector, waist protector, leg protector, knee protector, ankle protector, combined sports protector and other sports protector. Although there are many types of sports protective gear, it is not necessary to wear all of them in every sport during sports and competitions. It is necessary to choose the necessary protective gear for different sports, and to effectively protect the easily injured parts. Can. 1   sports glove Wearing fitness gloves, with soft gloves to improve comfort and protect the palms, can improve sports performance and make fitness more efficient. Application Scenarios The usa
阅读全文